RAD Data comm 100 Spezifikationen Seite 258

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 318
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 257
Chapter 7 Application Tutorial Installation and Operation Manual
7-14 User and Management Traffic Separated by VLAN Egate-100 Ver. 4.0
Egate-100
Configuration> Logical Layer
1. Port Number[1 - 126] ... (22)
2. Port Name ... (Logical Port 22)
3. Protocol Type > (GFP)
4. Multi Link >...(Yes)
5. Bind Logical Port > (21)
6. Payload FCS > (Disable)
7. Alarms > (Unmasked)
>
Please select item <1 to 7>
F - Forward Port; B - Backward Port; R - Remove Port
ESC-prev.menu; !-main menu; &-exit
Figure
7-19. Configuring Logical Port for RICi-16E1/T1 (GFP)
Setting Bridge Parameters
The following steps must be performed:
1. Configuring the bridge to VLAN-aware
2. Configuring the bridge ports as specified in
Table
7-4
3. Defining VLAN memberships as specified in
Table
7-5
.
Configuring the Bridge
The bridge must be configured to VLAN-aware, so that Egate-100 forwards traffic
based on VLAN as well as MAC address.
³ To configure the bridge parameters:
Navigate to the Bridge menu (Main Menu > Configuration > Applications >
Bridge) and configure the parameter values as illustrated in
Figure
7-20
.
Egate-100
Main Menu> Configuration> Application> Bridge
1. VLAN Mode > (Aware)
2. Aging Time (Sec)[30 - 10000] ... (300)
3. Split Horizon > (Disabled)
4. Vlan Ethertype (HEX) ... (8100)
5. Loop Detection ... (Enable)
6. Vlan Loop Detection [1 - 4094] ... (1)
7. Static MAC Table [] >
8. Remote Terminal (Disable)
9. Bridge Ports >
10. VLAN Membership >
Please select item <1 to 9>
ESC-prev.menu; !-main menu; &-exit
Figure
7-20. Configuring the Bridge
Seitenansicht 257
1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 317 318

Kommentare zu diesen Handbüchern

Keine Kommentare