RAD Data comm 100 Spezifikationen PDF herunterladen (Seite 160)

Chapter 4 Configuration Installation and Operation Manual

4-68 Configuring Egate-100 for Operation Egate-100 Ver. 4.0

Egate-100

Main Menu> Configuration> Applications> Bridge> Bridge Ports

1. Port Number [1 - 130] ... (3)

2. Port Name ... (Bridge Port 3)

3. Bind to > (Logical Port)

4. Logical Port Number [1 - 144] ... (1)

5. Administrative Status > (Up)

6. Ingress Filtering > (Enable)

7. Accept Frame Types > (Tag Only)

8. Port VID [1 - 4094] ... (1)

9. Default Priority Tag[0 - 7] ... (0)

10.Replace Priority > (No)

11.Egress Tag Handling > (None)

12.Ingress Tag Handling > (None)

13.Loop Detection > (Enable)

14.Maximum MAC Address[1 - 64000] >...(64000)

15.Link OAM(802.3ah) >...(Disabled)

Please select item <1 to 16>

F - Forward Port; B - Backward Port; R - Remove Port; S - Save

ESC-prev.menu; !-main menu; &-exit

Figure

4-66. Bridge Port Configuration Menu

In the Bridge Ports menu, configure the Bridge Port parameters according to

Table

4-31

. The settings pertain to the port to which you bound the bridge port

previously.

2. To navigate through the defined bridge ports, type F or B to move one port

forward or backward respectively.

3. To remove the current bridge port, type R.

4. Select Save.

Table

4-31. Bridge Port Parameters

Parameter Description Possible Values

Bind to

Specifies the physical, logical or virtual port

to which the bridge port is bound

Default: Logical Port

Host

1GbE-1 or 1GbE-2

ETH MNG

Logical Port

SVI-1

SVI-2

Logical Port Number

The logical port number. This parameter

appears only if binding to a logical port

1-126

Port Number

The bridge port number.

1 is reserved for the host bridge port.

1-130

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 317 318

Kommentare zu diesen Handbüchern

Keine Kommentare

RAD Data comm 100 Spezifikationen Seite 160

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung RAD Data comm 100