RAD Data comm 100 Spezifikationen PDF herunterladen (Seite 109)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Management 4-17

Egate-100

Configuration>System>Management> SNMPv3 Settings> Target & Notify > Target Params

1. Name ... (11)

2. Message Processing Model > (SNMPv1)

3. Security Model > (Any)

4. Security Name ... ()

5. Security Level > (noAuthNoPriv)

F-Forward B-Backwards R-Remove

ESC-prev.menu; !-main menu; &-exit 1 Mngr/s

Figure

4-14. Target Params Menu

3. Select Save.

³ To delete a target parameter:

• From the Targets & Notify menu (Configuration > System > Management >

SNMPv3 Settings > Targets & Notify), select Target Parameters.

 Type F (Forward) or B (Back) to select a notification entry.

 Type R (Remove) to delete the selected entry.

Configuring Target Address

Each target must have a valid IP address, IP mask. In addition, a previously

configured parameter set and notification tags must be assigned to the target.

³ To configure the target address:

1. From the Targets & Notify menu (Configuration > System > Management >

SNMPv3 Settings > Targets & Notify), select Target Address.

The Target Address menu is displayed as illustrated in

Figure

4-15

2. From the Target Address menu, configure the following:

 Name (ASCII string identifying the target)

 IP Address (Valid IP address of the NMS. Must be in the

xxx.xxx.xxx.xxx:162 format, where 162 is a standard SNMP port used for

sending traps)

 Params Name (List of previously defined target parameter names)

 Address Mask (An IP mask of the NMS)

 Tag List (List of previously defined notification tags).

3. Select Save.

³ To view the summary of the SNMPv3 target configuration:

• From the SNMPv3 Settings menu (Configuration > System > Management >

SNMPv3 Settings), select Summary Target Table.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 317 318

Keine Kommentare

RAD Data comm 100 Spezifikationen Seite 109