RAD Data comm 100 Spezifikationen PDF herunterladen (Seite 120)

Chapter 4 Configuration Installation and Operation Manual

4-28 Configuring Egate-100 for Operation Egate-100 Ver. 4.0

Egate-100

…Configuration> System> Clock Source> Master Clock

1. Source > (Rx Clock)

2. Wait to Restore (sec) ... (300)

3. Port Number [1 - 3] > (1)

Please select item <1 to 2>

ESC-prev.menu; !-main menu; &-exit

Figure

4-25. Master Clock Menu (SDH/SONET)

Egate-100

…Configuration> System> Clock Source> Master Clock

1. Source > (Rx Clock)

2. Wait to Restore(sec)[0 - 720] ... (300)

3. Port Number [1 - 3] ... (2)

Please select item <1 to 3>

S - Save

ESC-prev.menu; !-main menu; &-exit

Figure

4-26. Master Clock Menu (T3)

3. Choose one of the following to indicate the first-priority source of timing for

the Egate-100:

 Rx Clock. If you want the master clock source to be the Rx clock from the

T3 active link. This is the default value

 Internal. If you want the master clock to be the internal clock of the

Egate-100 unit.

4. If you choose Rx Clock, enter a Wait to Restore value: the number of seconds

(between 0 and 720) to wait before an attempt for the Master clock to be

restored.

5. For Rx Clock, specify the port number to be used.

6. Select Save.

7. From the Clock Source menu, select Fallback Clock.

The Fallback Clock menu appears as illustrated in

Figure

4-27

Egate-100

Main Menu> Configuration> System> Clock Source> Fallback Clock

1. Source > (Internal)

Please select item <1 to 2>

ESC-prev.menu; !-main menu; &-exit

Figure

4-27. Fallback Clock Menu (SDH/SONET)

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 317 318

Kommentare zu diesen Handbüchern

Keine Kommentare

RAD Data comm 100 Spezifikationen Seite 120

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung RAD Data comm 100