RAD Data comm 100 Spezifikationen PDF herunterladen (Seite 24)

Quick Start Guide Installation and Operation Manual

Egate-100

Main Menu> Configuration> Quick Setup> User Setting

Bridge Port Number [1 - 130] ...(3)

1. Port Name ...(Bridge Port 3)

2. Protocol Type > (HDLC)

3. Physical Port Number[1 - 63] > (1)

4. Frame Type > (Unframed)

5. HDLC Flags[1-7] > (1)

6. Administrative Status > (Up)

7. Queue Profile Name > ()

8. Ingress Filtering > (Enabled)

9. Accept Frame Types > (Tag only

10. Port VID > ...(1)

11. Default Priority Tag ...(0)

12. Replace Priority > (No)

13. Egress Tag Handling > (None)

14. Ingress Tag Handling > (None)

15. Loop Detection > (Enable)

16. Link OAM (802.3ah) > (Disabled)

17. Maximum MAC Address[1 - 64000] ...(64000)

18. VLAN ID ...(0)

Please select item <1 to 6>

F – Fwd Port; B – Backward Port; R – Remove Port; A – Add Port

ESC-prev.menu; !-main menu; &-exit

Quick Setup User Setting Menu

7. For each physical port that you wish to configure and/or bind to a bridge

port, press <A> and configure the following parameters:

 Protocol Type. HDLC, PPP over HDLC for multiple E1/T1, or MLPPP for the

bundle that is bound to the PPP logical port, or GFP multi (LCAS) for

multiple E1/T1 ports

 Physical Port Number. One of the 63/84 physical E1/T1 ports

 Frame Type. Framing mode, Unframed/CRC-4/no CRC-4 for E1,

Unframed/ESF/D4 for T1

 HDLC Flags. 1-7. The flags before and after an HDLC frame indicate the

start and end of the frame

 Administrative Status. Enabled (Up) or disabled (Down)

 Queue Profile Name. Name allocated to the queue profile

 Ingress Filtering. Enabled or disabled

 Accept Frame Types. All or Tag only

 Port VID

4 Configuring Egate-100 Egate-100 Ver. 4.0

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 317 318

Keine Kommentare

RAD Data comm 100 Spezifikationen Seite 24