
Chapter 4 Configuration Installation and Operation Manual
4-66 Configuring Egate-100 for Operation Egate-100 Ver. 4.0
Parameter Description Possible Values
VLAN
Membership
• Refer to
Configuring VLAN Membership.
• This parameter becomes available if the
VLAN mode is VLAN Aware.
Configuring the MAC Table
Static MAC addresses are stored in the MAC table. The column for VLAN ID
appears in a VLAN-aware bridge only.
³ To add a static MAC address:
1. Navigate to Main Menu > Configuration > Applications > Bridge, and then
select Static MAC Table.
The Static MAC Table appears as illustrated in
Figure
4-64
.
Egate-100
Configuration> Applications> Bridge> Static MAC Table
VLAN ID MAC Address Receive Bridge Port
1 1 11-11-11-11-11-11 1
| 2 2 22-22-22-22-22-22 2
v 3 3 33-33-33-33-33-33 3
4 4 44-44-44-44-44-44 4
5 5 55-55-55-55-55-55 5
1. MAC address … (11-11-11-11-11-11)
S/s – Save ; A/a – Add entry
ESC-prev menu; !-main menu; &-exit; ?-help
Figure
4-64. Static MAC Table
2. In the Static MAC Table, type A.
The Static MAC Table switches to the Add mode as illustrated in
Figure
4-65
.
Egate-100
Configuration> Applications> Bridge> Static MAC Table
1. VLAN Number > ()
2. MAC Address > (0.0.0.0)
3. Received Bridge Port > ()
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit
Figure
4-65. Static MAC Table, Add Menu (Aware Bridge)
3. In Add mode, configure the MAC Table parameters according to
Table
4-30
.
4. Select Save.
Kommentare zu diesen Handbüchern