RAD Data comm 100 Spezifikationen PDF herunterladen (Seite 106)

Chapter 4 Configuration Installation and Operation Manual

4-14 Configuring Egate-100 for Management Egate-100 Ver. 4.0

 usmNoAuthProtocol (No authentication is performed)

 usmHMACMD5AuthProtocol (MD5 protocol)

 usmHMACSHAAuthProtocol (SHA protocol)

4. Select Privacy Protocol and define the type of privacy protocol to be used for

encryption:

 usmNoPrivProtocol (Privacy protocol is not used)

 usmDESPrivProtocol (DES protocol)

5. Select Authentication Password and define the authentication password of

the user. This is not available if authentication has been disabled.

6. Select Privacy Password and define the private key used for encryption. This

is not available if privacy has been disabled.

Minimum password length is at least 8 characters long.

7. Select Save.

³ To view the summary of the SNMPv3 user configuration:

• From the SNMPv3 Settings menu (Configuration > System > Management >

SNMPv3 Settings), select Summary User Table.

³ To delete an SNMPv3 user:

• From the Users menu (Configuration > System > Management > SNMPv3

Settings > Users), perform the following:

 Type F (Forward) or B (Back) to select an SNMPv3 user.

 Type R (Remove) to delete the selected user.

Adding SNMPv3 Notification Entries

You can define which types of notification will be sent to the target management

stations (the target stations are defined separately, as explained in

Configuring

Target Parameters

³ To define a notification entry:

1. From the SNMPv3 Settings menu (Configuration > System > Management >

SNMPv3 Settings), select Targets & Notify.

2. Select Notify.

The Notify menu is displayed as illustrated in

Figure

4-12

3. From the Notify menu, define the following:

 Name – up to 60 characters (ASCII string identifying the notification

entry)

 Tag – 0-255 (A tag value to be associated with the current notification

entry. This tag is used to identify the current notification entry when

configuring the target address).

Not

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 317 318

Keine Kommentare

RAD Data comm 100 Spezifikationen Seite 106