RAD Data comm ARC-101 Bedienungsanleitung PDF herunterladen (Seite 120)

120 Rockwell Automation Publication 750-TD001H-EN-P - June 2013

PowerFlex 750-Series AC Drives

Specifications - Communication Options and Accessories (continued)

20-XCOMM-DC-BASE 20-XCOMM-IO-OPT1 20-XCOMM-AC-PS1

Network

Protocol:

Data Rate:

Dependent on installed adapter

––

Drive

Protocol:

Data Rates:

DPI

125/500 Kbps

––

Number of Inputs: – 6 (single common) –

Input Voltage Type: – 24 VDC source load –

Maximum Input Voltage: – 27V DC –

Rated Input Voltage: – – 100…240V AC

Operating Input Voltage: – – 90…264V AC

AC Input Frequency: – – 47…63 Hz

Maximum Input Current: – 8 mA (each input) –

Guaranteed ON-State Voltage: – 10…27V DC (3 mA minimum) –

Guaranteed OFF-State Voltage: – 0…5V DC (2 mA maximum) –

Reverse Polarity Protected: – -30V DC –

Input Response Time: – 25 ms + network update time

(2)

(2) The I/O board is NOT designed for fast I/O response times. Do NOT use with input devices that will transition (OFF-ON-OFF) faster than the response time. Potential input devices include auxiliary contact

inputs from relays or overloads, pushbuttons, etc.

–

Number of Outputs: – 2 relay outputs (individually isolated) 1 - Form C

contacts 1 - Form A (NO) contact

–

Maximum Output Contact

Voltage:

– 27V DC/125V AC –

Maximum Output Contact

Current:

–2 A–

Output Voltage: – – 24V DC

Output Current: – – 830 mA

Expected Contact Life: – 1,000,000 cycles resistive at < 0.5 A

500,000 cycles inductive at < 0.5 A

500,000 cycles resistive at 1 A

300,000 cycles inductive at 1 A

300,000 cycles resistive at 2 A

150,000 cycles inductive at 2 A

–

Output Response Time: – 25 ms + network update time

(3)

(3) The I/O board is NOT designed for fast I/O response times. Do NOT use with output devices that need to transition (OFF-ON-OFF) faster than the response time. Potential output devices include pilot lights

or a contact closure reset to another hardware device.

–

Consumption

Module:

Network:

60 mA at 12V DC supplied from drive via DPI cable

Ethernet: None

ControlNet: None

DeviceNet: 60 mA at 24V DC

––

DC Power Supply Requirement 20-COMM-C: 105 mA at 24V DC

(1)

20-COMM-D: 60 mA at 24V DC

(1)

20-COMM-E: 140 mA at 24V DC

(1)

20-COMM-Q: 135 mA at 24V DC

(1)

20-COMM-M: 140 mA at 24V DC

(1)

(1) Since the Comms Kit is powered by a nominal 24 VDC, the current consumption listed in this table differs from the value shown on the label of the communication adapter, which is based on the adapter

being powered by 5 VDC from the drive.

––

Dimensions (H x W x D): 108* x 108 x 75 mm

(4.25 x 4.25 x 2.95 in.)

with I/O terminal block attached

––

Weight: 340 g (12 oz) – –

Certifications

c-UL

C-Tick

UL508C

CAN/CSA C22.2 No. 14

–

––

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 133 134

Kommentare zu diesen Handbüchern

Keine Kommentare

RAD Data comm ARC-101 Bedienungsanleitung Seite 120

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein RAD Data comm ARC-101