RAD Data comm LRS-24 Spezifikationen PDF herunterladen (Seite 65)

Installation and Operation Manual Appendix C Command List

ASM-40CD Ver. 1.0 Modem Setup C-3

MODEM SETUP

MODEM NAME : ASM 40CD (m)

DEFINE MODEM PORT NUMBER : 1

MODEM STATUS : MASTER PERMANENT

SELECT MODEM : MODEM 1 LOCAL

SYNC/ASYNC : N/A CHARACTER LENGTH : N/A

No. STOP BIT : N/A DATA RATE : 2048k

PARITY : N/A CD SENSE : N/A

CLOCK SOURCE LOC/REM : L(INT) R(RCV) EXT SOURCE : N/A PORT: N/A

INTERFACE : N/A RTS/CTS DELAY(0:255) : N/A

RTS TO DCD : N/A DTR TO DSR : N/A

OUTPUT LEVEL : N/A INPUT LEVEL : N/A

OUTPUT IMPEDANCE : N/A ohm INPUT IMPEDANCE : 120 ohm

CARRIER CONTROL : ON ERROR CORRECTION : N/A

RATE ADAPTION METHOD : N/A AIS : N/A

LINE CODING : HDB83 PHANTOM : OFF

T1 LINE LENGTH : N/A

BRIDGING : N/A ETHERNET MODE : N/A

MASK SIGNAL STATUS : DATA:NO RTS:NO TD:NO RD:NO

DCD:NO TEST:NO ERR:NO LOS:NO

Figure C-2. Modem Setup Screen

Bolded rows in

Figure C-2

indicate parameters applicable to ASM-40CD and

standalone modems. Additional, non-bolded parameters listed on a screen apply

to other modems installed in the LRS-24 hub.

Table C-2

explains the transmission parameters and options for ASM-40CD that

can be viewed and set using the Modem Setup screen. The Write fields can be

changed only if the Master configuration mode is indicated in the Modem Status

field.

Table C-2. Modem Setup Screen

Parameter Type Function Options Option Indicates

MODEM NAME Read Identifying the modem

type whose status is being

viewed or modified

ASM-40CD(m) Master ASM-40CD

SELECT MODEM Write Selecting one of two

modems whose operational

parameters are set using

this screen.

Modem 1 Local

Modem 2 Local

Operational parameters will be set

for the modem installed in the LRS-

24 hub

DATA RATE Write Setting data rate

transmitted between

modems

32, 64, 128, 192, 256, 384, 512,

768, 1024, 1536, 1544, 1920, or

2048 kbps

CLOCK SOURCE

LOCAL/REMOTE

Write Timing mode

Note:

Clock mode of both

local and remote units

must be configured

manually.

L(INT), R(RCV) Crystal of the local modem is the

clock source; remote modem is

synchronized to the clock extracted

from the receive signal

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

RAD Data comm LRS-24 Spezifikationen Seite 65

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung RAD Data comm LRS-24