RAD Data comm 146 Bedienungsanleitung Seite 91

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 202
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 90
5620 Model Descriptor for LA-110 User’s Manual Chapter 4 Port Configuration and Monitoring
SHDSL Port Configuration 4-41
Table 4-21. SHDSL Port – Physical Layer Status Parameters
Parameter Remarks
Port The selected port
SHDSL
Read-only
Type The protocol application which runs above the physical port.
SHDSL
Read-only
Bit Rate An estimate of the interface's current bandwidth in bits per second.
Read-only
DSP Version The version of the SHDSL standard implemented as reported in an Inventory Response
message.
Read-only
Vendor SW
Version
Vendor software version as reported in an Inventory Response message.
Read-only
Loop
Attenuation (dB)
The current loop attenuation for this endpoint as reported in a Network or Customer
Side Performance Status message.
Read-only
SNR Margin (dB) The current SNR margin for this endpoint as reported in a Status Response/SNR message.
Read-only
No Defect The current state of the endpoint.
On, Off
Read-only
Power Back Off The current state of the endpoint.
On, Off
Read-only
SNR Margin
Alarms
Displays the signal/noise margin in dB, measured at the instant the command has been
received by LA-110.
On, Off
Read-only
Loop
Attenuation
Alarm
Displays the loop attenuation threshold in dB, measured at the instant the command has
been received by LA-110.
On, Off
Read-only
Seitenansicht 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 201 202

Kommentare zu diesen Handbüchern

Keine Kommentare