RAD Data comm 146 Bedienungsanleitung PDF herunterladen (Seite 40)

Chapter 3 System Configuration and Monitoring 5620 Model Descriptor for LA-110 User’s Manual

3-16 Viewing ATM to FR IWF Settings

3.8 Viewing ATM to FR IWF Settings

You can select the Frame Relay interworking mode: network interworking per

FRF.5 or service interworking per FRF.8.

• The network interworking mode, defined in FRF.5, is used to interconnect

Frame Relay equipment through an ATM network. You can configure the way

the Frame Relay traffic control parameters are converted to the cell loss

priority (CLP) indicator used on the ATM connection, and back.

• Service interworking mode, defined in FRF.8, is used to interconnect an

equipment unit with Frame Relay interface to an equipment unit with ATM

interface.



To view the ATM to FR IWF Table:

1. In the LA-110 Node Draw, select the system (as described in Selecting the

System), and from the menu bar, select

Object > Configure > ATM to FR IWF Table.

Figure 3-10. ATM to FR IWF Table

2. View the fields, as described in Table 3-8.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 201 202

Keine Kommentare

RAD Data comm 146 Bedienungsanleitung Seite 40