Optimux-108, Optimux-106
Fiber Multi
lexer for 4 E1/T1 and Ethernet or Serial Data
STANDALONE UNITS
Uplink Interfaces
Optimux-108/106 supports a variety of
built-in optical uplink interfaces including:
• 850 nm VCSEL (Vertical Cavity Surface
Emitting Laser) for multimode fiber
• 1310 nm LED for multimode fiber
• 1310/1550 nm laser diode or long haul
laser diode for extended range over
single-mode fiber
• Single fiber (SF1, SF2 options) using a
1310 nm and 1550 nm laser diode
transmitter with WDM technology,
which enables the laser to transmit the
signal at a different wavelength than
the receive signal
• Single fiber (SF3 option) using SC/APC
(Angle-Polished Connector)
technology, with a 1310 nm laser
diode for single wavelength operation.
The basic models include a fiber optic
uplink and four tributary E1/T1 links. The
standalone units are supplied with
balanced E1 and T1 interfaces.
Optimux-108 can be ordered with
unbalanced E1 interfaces.
Optimux-108/106 can be ordered with an
additional Ethernet user port (VLAN
transparent), and with redundant uplink.
Optimux-108 can also be ordered with a
V.35 interface in place of the Ethernet
user port.
Diagnostics
Optimux features comprehensive test and
diagnostics capabilities that include local
and remote loopbacks on the uplink
interface and on each E1/T1 tributary link.
A local loopback is also supported on the
optional V.35 user port.
To facilitate system diagnostics,
Optimux-108/106 features LED status
indicators, AIS alarm generation and
recognition, and dry contact closure upon
link failure.
Management
Optimux-108/106 can be configured and
monitored locally using an ASCII terminal
connected to the control port or remotely
via the Ethernet management port using:
• RADview-EMS running in a
Windows or Unix environment
• Web-based remote access terminal
• Telnet.
Power
The power supply is a wide-range AC/DC
power supply that can be connected to
either an AC power source (100 to
240 VAC), or a DC power source
(-40 to -125 VDC). An optional second
power supply provides redundancy. As an
option, the devices can also be ordered
with a non-redundant 24 VDC power
supply (20 to 36 VDC).
Physical
Optimux-108/106 is a compact standalone
unit, available in plastic or metal
enclosures. The metal enclosures are
available in extended temperature
versions. The optional rack mount adapter
kits enable installation of one or two
(side-by-side) units in a 19-inch rack.
CARD MODULES
The OP-108C and OP-106C multiplexers
are cards designed for operation in the
LRS-102 chassis. They combine up to
eight E1 or T1 channels and two optional
Ethernet links over two fiber optic links
from two remote units (up to four E1/T1
and 100 Mbps Ethernet traffic from each
remote unit).
The LRS-102 chassis accommodates up to
12 cards (24 links). An Optimux link
provides a simple and low-cost solution
for connectivity over distances of up to
120 km (74.5 miles).
Figure 1. Ethernet, Voice, Data and Video Services over Fiber
Order from: Cutter Networks
Ph: 727-398-5252 / Fx: 727-397-9610
(8 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern