RAD Data comm MBE10-8D Bedienungsanleitung PDF herunterladen (Seite 2)

DESCRIPTION

n The MBE Family is part of the LAN

RANger Series of Ethernet Remote

Access Routers that provide

cost-effective remote access

connectivity for SoHo (Small office

Home office) applications.

n The MBE Family supports remote

access routing and bridging for

connecting remote PCs or LANs to a

central LAN over a wide variety of

WAN interfaces and services,

including ISDN, Frame Relay,

Leased Line, dial-up modems,

and DDS.

n Routing and bridging are

performed on a link-by-link basis.

There are no bridging or routing

limitations on the central LAN.

However, additional bridges should

not be connected to the remote LAN.

n IP can be routed over PPP, SLIP,

CSLIP or Frame Relay; IPX can be

routed over PPP or Frame Relay.

n Router links can operate opposite

any PPP standard compliant device,

including third party routers and

software based PPP dialers (e.g.,

Windows 95).

n Bridge links are transparent to

layer 3 protocols, such as NetBIOS

and DECNET.

n The Single IP address translation

feature allows a small or medium

office LAN to connect to the Internet

using a single, dynamically or

statically allocated IP address from

the central access router.

n For router links, the IP parameters

and the configuration file are learned

automatically from any BOOTP

server via standard BOOTP protocol.

n Transparent remote to remote

forwarding enables direct data

transfer between links whether the

links are bridge or router

(see Figure 1).

n Multilink PPP support enables

use of ISDN at 128 kbps.

n The MBE family includes the

following models:

– MBE10-1, single link router

supporting a single remote station for

bridge links or full LAN segment for

router links.

– MBE10-1D, dual link router

supporting a single remote station on

each bridge link or a full LAN

segment on each router link.

– MBE10-8, single link router

supporting a remote Ethernet LAN of

up to 80 workstations on bridge links

or a full LAN segment on router links.

– MBE10-8D, dual link router

supporting a remote Ethernet LAN of

up to 80 workstations on each bridge

link or a full LAN segment on each

router link.

APPLICATION

Figure 1 - Transparent Remote to Remote Forwarding allows direct communication

between two remote sites, irrespective of the type of links being used

1 2 3 4 5 6

Kommentare zu diesen Handbüchern

Keine Kommentare

RAD Data comm MBE10-8D Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung RAD Data comm MBE10-8D