RAD Data comm FCD-G703 Bedienungsanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
Data Sheet
E1/T1 PDH INTERFACE
Number of Ports
8 E1, 21 E1, 8 T1, or 28 T1
Compatibility
ITU-T Rec. G.703, unframed
Nominal Data Rate
E1: 2.048 Mbps
T1: 1.554 Mbps
Line Code
E1: HDB3
T1: B8ZS
Impedance
E1: 120 balanced or
75 unbalanced
T1: 100 balanced
Maximum Line Attenuation
36 dB (LTU mode)
12 dB (DSU mode)
Timing
Source clock is recovered from the receive
signal coming from the remote E1/T1
side
Locked to the SDH/SONET interface clock
Connectors
8 E1, 8 T1: DB-44
21 E1, 28 T1: DB-62
E3/T3 PDH INTERFACE (OPTION)
Number of Ports
1
Compatibility
ITU-T Rec. G.703, unframed
Data Rate
E3: 34.368 Mbps
T3: 44.736
Mbps
Framing
Unframed
Line Code
E3: HDB3
T3: B3ZS
Line Impedance
75
Connector
2 BNC female
Timing
Source clock is recovered from the receive
signal from the remote E3/T3 side
Locked to the SDH/SONET interface clock
MANAGEMENT PORTS
Control Port
Interface: V.24/RS-232
Connector: 9-pin D-type, female
Format: Asynchronous
Baud rate: 0.3–115.2 kbps
Selectable word format: 7 or 8 bits, no
parity, 7 bit odd or even parity
Out-of-Band Access
Single Ethernet port FCD-155E version:
NG ETH port
Other FCD-155E versions:
ETH 1 and ETH 2 ports (through
internal Ethernet switch)
INDICATORS
General
PWR (green) Power
TST (yellow) Test
MAJ ALM (red) Major alarm
MIN ALM (red) Minor alarm LOC SYNC
LOSS (red) Local loss of synchronization
on the STM-1/OC-3 links
REM SYNC LOSS (red) Remote loss of
synchronization on the STM-1/OC-3
links
ETH, MNG, GbE (per port)
LINK (green) LAN link integrity
ACT (yellow) LAN data activity
E1/T1 PDH Interface (per port)
LOS (red) Link signal loss
AIS (red) Alarm indication signal on link
E3/T3 PDH Interface
LOS (red) E3/T3 link signal loss
STM-1/OC-3 Main Links
LOS (red) STM-1/OC-3 link signal loss
ON LINE (green) STM-1/OC-3 link is
active (indicator is on) or standby
(indicator is blinking)
Station Clock
ON (green) Station clock port is
connected
LOS (red) Station clock signal loss
GENERAL
Power
100 to 240 VAC ±10%, 50 to 60 Hz
-48 VDC (-40 to -72 VDC)
+24VDC
Power Consumption
30W
Alarms
Last 100 alarms are time stamped, stored,
and available for retrieval
Alarm Relay Port
Operation: normally open, normally
closed, using different pins
Connector: 9-pin, D-type, female
Physical
Height: 4.4 cm (1.7 in)
Width: 44.0 cm (17.3 in)
Depth: 25.4 cm (10.0 in)
Weight: 4.1 kg (9.0 lb)
Environment
Temperature: -10° to 60°C (14° to 140°F)
Humidity: Up to 90%, non-condensing
Seitenansicht 4
1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare