
140
RAD Data Communications 2011 Catalog
COPPER MODEMS
ASM-40
High Speed Short Range Modem
•
Selectable data rates: 32 kbps to
2.048 Mbps
•
Range up to 1.75 km (1.1 miles)
•
V.54 diagnostics
•
Digital interfaces: V.24, V.35, X.21,
RS-530, V.36/RS-449, Ethernet (bridge)
or G.703 (HDB3)
•
Optional built-in router
The ASM-40 is a high speed synchronous short
range modem operating at 13 selectable data
rates, from 32 kbps up to 2.048 Mbps with a
range up to 1.75 km (1.1 miles).
The modem transmits data to the line at four
data rates, depending upon the selected DTE
rate or the PCM network. Data rates of 32, 64,
128, 256, 512, 1,024 and 2,048 kbps are
transmitted at 2,048 kbps; data rates of 192,
384, 768 and 1,536 kbps are transmitted at
1,536 kbps; the 1,544 kbps data rate is
transmitted at 1,544 kbps; and the 1,920 kbps
data rate is transmitted at 1,920 kbps.
The modem’s line interface is coded using
HDB3, AMI or B8ZS (strap-selectable). On the
digital side, a choice of V.35, V.36/RS-449, X.21,
RS-530, built-in Ethernet bridge, router or
G.703/HDB3 interfaces is available. This also
enables the ASM-40 to perform as an interface
converter, a rate converter or a repeater for G.703.
The ASM-40 features V.54 diagnostic capabilities
to perform local analog loopbacks and local and
remote digital loopbacks. An internal test
pattern complying with the V.52 standard can be
generated to provide end-to-end integrity
testing.
The ASM-40 is available as a standalone unit or
as a card for the 19-inch ASM-MN-214 rack that
holds up to 14 cards (see page 127).
For latest updates visit www.rad.com
•
Selectable data rates:
– 1.2 kbps up to 128 kbps (sync)
– Up to 38.4 kbps (async)
•
2-wire full duplex
•
Adaptive echo canceller
•
Range up to 8 km (5 miles) over
24 AWG lines
•
2B1Q line code
•
DTE interfaces: V.24/RS-232, V.35, V.36,
RS-530, X.21, Ethernet (bridge) or G.703
codirectional (64 kbps)
•
Optional built-in router
ASM-31
2-Wire Multirate Short Range Modem
The ASM-31 multirate sync/async short range
modem operates full duplex over a 2-wire
twisted pair. The ASM-31 can operate at
selectable data rates from 1.2 kbps to 128 kbps.
Full duplex operation is achieved using the
adaptive echo cancellation technique. This
method entails setting one modem as a master
and the other as a slave (switch-selectable).
2B1Q line coding provides an operating range of
up to 8 km (5 miles) for all data rates, with an
internal rate converter that converts all DTE data
rates to a line data rate of 128 kbps.
Local and remote loopbacks can be activated
from either side of the line, to test both
modems and the line. Loopbacks are controlled
by a manual switch or from the DTE interface.
The modem includes a BER tester for complete
end-to-end integrity testing. An error LED
indicates each bit error detected. The ASM-31
has line protection circuits against lightning and
power surges.
Interface options include V.24/RS-232, V.35, V.36,
X.21, RS-530, built-in Ethernet bridge, router, and
G.703 codirectional 64 kbps. The analog line
connectors are RJ-45 and terminal block.
The ASM-31 is available as a standalone unit or
as a card for the 19-inch ASM-MN-214 rack that
holds up to 14 cards (see page 127).
2-wire
ASM-31
8km(5 miles)
Bridge/router
V.35
ASM-31
Ethernet
For latest updates visit www.rad.com
Kommentare zu diesen Handbüchern