Rad-data-comm ASM-20 Bedienungsanleitung Seite 26

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 78
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 25
Chapter 2 Installation and Setup ASM-20 Installation and Operation Manual
2-2 Setting Internal Jumpers and Switches
2.4 Equipment Needed
ASM-20 is a standalone device designed to be placed on a tabletop or bench. It is
delivered completely assembled. No provisions are made for bolting ASM-20 to
the tabletop.
No special equipment is needed for installing ASM-20.
2.5 Setting Internal Jumpers and Switches
To set the jumpers and switches:
1. Disconnect the power cable.
2. Loosen the screws holding the bottom cover in place.
3. Remove the top cover.
4. Adjust the jumpers as required. See Table 2-1.
5. Replace the top cover and tighten the retaining screws.
Seitenansicht 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare