RAD Data comm IPmux-8 Spezifikationen Seite 34
- Seite / 174
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Chapter 1 Introduction Installation and Operation Manual
1-16 Functional Description IPmux-8/16 Ver. 6.00
Table 1-1. TDMoIP Frame Structure (Cont.)
Field Length Field Notes
4 bits FORMID Format Identifier: AAL1, AAL2,
HDLC etc
1 bit R Bit Indicates Local loss of
Synchronization at the
opposite TDM side
1 bit
R Bit Indicates that the
opposite TDMoIP device
is not receiving packets
at the Ethernet port
4 bits RES Reserved
6 bits LENGTH TDMoIP packet length (CW
and payload). Used when total
packet length is less than
64 bytes. Otherwise is set to 0.
16 bits Sequence number Used by the receiving IPmux
to detect packet loss
...
Payload
4 bytes CRC
The UDP Source Port value calculation depends on the selected TDMoIP version
(1 or 2):
• TDMoIP version 1:
During normal operation the UDP Source Port value equals Destination
Bundle Number + 1 (for example, for bundle 1 the UDP Source Port equals
2). The allowed range for the UDP Source Port values in the normal state is
from 0 to 8191.
If a bundle is in the local fail state, the MSB of the UDP Source Port is set to
1 to indicate the local fail state to the remote equipment. In this case the
UDP Source Port value equals 0x8000 + Destination Bundle Number + 1.
The UDP Source Port value in the local fail state is always greater than
32768.
• TDMoIP version 2: The UDP Source Port value equals 0x2000 + Destination
Bundle Number, it is always greater than 8192.
VLAN Support
IPmux-8/16 can be configured with or without VLAN support. If VLAN is selected,
then all the traffic originating from IPmux-8/16 must have 802.1 p&Q Ethernet
frame format. IPmux-8/16 supports service levels of traffic separation to different
VLANs. Every TDMoIP bundle has its own VLAN ID configuration.
Not
e
Control Word
MAC Layer
Data La
y
er
- TDM Pseudowire Access 1
- Gateways 1
- IPmux-8, IPmux-16 3
- Limited Warranty 4
- General Safety Instructions 5
- Product Disposal 5
- Handling Energized Products 6
- FCC-15 User Information 9
- Declaration of Conformity 10
- Conventions 12
- Quick Start Guide 13
- Contents 15
- IPmux-8/16 Ver. 6.00 iii 17
- Chapter 1 19
- Introduction 19
- Applications 20
- Features 21
- 4-Port Ethernet Module 23
- 1-Port Ethernet Module 24
- Default Next Hop per Host 24
- Download (DL) Transparent 25
- Operation Modes for E1/T1 25
- Multibundling 25
- 1.2 Physical Description 27
- 1.3 Functional Description 28
- Unframed 29
- External Network Timing 30
- Single Source Clock Network 31
- Bundle Redundancy 32
- Frame Format 32
- MAC IP UDP CW 33
- VLAN Support 34
- Packet Delay Variation 35
- PDVT (Jitter) Buffer 36
- Packetization Delay 36
- Round Trip Delay 37
- Ethernet 37
- Ethernet Redundancy 38
- Load Sharing 38
- Rate Limiter Option 39
- Table 1-5. Mode A 40
- Table 1-6. Mode B 40
- Table 1-7. Mode C 40
- Table 1-8. Mode D 41
- Table 1-9. Mode E 41
- Table 1-10. Mode F 41
- Ethernet Throughput 42
- End-to-End Alarm Generation 43
- Management 44
- 1.4 Technical Specifications 45
- Environment 49
- Chapter 2 51
- Installation and Setup 51
- 2.3 Package Contents 52
- ~100 -24 0VAC 3A T 125V 53
- ~100-240VAC 3A T 125V 53
- Installing SFP Transceivers 55
- To connect to an NMS: 57
- Connecting AC Power 58
- Connecting DC Power 59
- Chapter 3 61
- Operation 61
- IPmux-16 63
- 3.3 Default Settings 64
- To enter as a superuser: 67
- To enter as a user: 67
- Overview of Menu Operations 68
- Configuration 69
- Physical Layer Configuration 69
- Timeslot Configuration 70
- IP Support 70
- To power off IPmux-8: 71
- To power off IPmux-16: 71
- Chapter 4 73
- Defining Network Managers 76
- Configuring Default Gateway 78
- Controlling Telnet Access 79
- Controlling SNMP Access 79
- Configuring Ethernet Bridge 84
- Defining VLANs 85
- Configuring E1 Interface 86
- Configuring T1 Interface 88
- 0–F (ESF) 90
- 0–3 (D4) 90
- 3, 4 for the slot 95
- 1–4 or 1–8 for the link 95
- Connecting Bundles 96
- 496 (E1), 384 (T1) 96
- Configuring IP ToS Support 103
- 4.3 Additional Tasks 105
- Setting Date and Time 106
- Managing File System 107
- Type Y to confirm 108
- Transferring Files via TFTP 109
- Resetting IPmux-8/16 110
- Chapter 5 113
- Configuring for a Typical 113
- Application 113
- Configuration Summary Table 114
- 5.3 Configuring IPmux-16 116
- Configuring Bundles 117
- IPmux-8/16 Ver. 6.00 118
- Chapter 6 121
- Troubleshooting and 121
- Diagnostics 121
- Fragments 124
- Displaying E1/T1 Statistics 125
- Displaying E3/T3 Statistics 129
- Displaying Events 141
- Clearing Events 142
- Masking Alarm Traps 143
- Working with Alarm Relay 145
- 6.3 Testing the Units 146
- Remote IPmux-16 147
- IP/Ethernet 147
- Running Ping Test 148
- Tracing the Route 149
- 6.4 Troubleshooting 150
- 6.6 Technical Support 153
- Appendix A 155
- Interface Connector 155
- Specifications 155
- A.3 CONTROL Connector 156
- Cross Cable Wiring 157
- A.4 Alarm Connector 158
- A.5 External Clock Connector 158
- Appendix B 159
- Boot Sequence for 159
- Downloading Software 159
- Boot Sequence 160
- Accessing the Boot Menu 160
- Appendix C 161
- SNMP Management 161
- MIB Structure 162
- SNMP Communities 163
- Authentication 164
- Network Management Stations 164
- Customer Response Form 169
- Error Report 171
Verwandte Produkte und Handbücher für Gateways / Controller RAD Data comm IPmux-8
(192 Seiten)Vision Fitness X6600iNetTV manuali
Manuali dei proprietari e guide per l'utente per Sport e divertimento Vision Fitness X6600iNetTV.
We fornisce 1 manuali pdf Vision Fitness X6600iNetTV per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Kommentare zu diesen Handbüchern